=pod =head1 NAME EVP_CIPHER_fetch, EVP_CIPHER_up_ref, EVP_CIPHER_free, EVP_CIPHER_CTX_new, EVP_CIPHER_CTX_reset, EVP_CIPHER_CTX_free, EVP_EncryptInit_ex, EVP_EncryptInit_ex2, EVP_EncryptUpdate, EVP_EncryptFinal_ex, EVP_DecryptInit_ex, EVP_DecryptInit_ex2, EVP_DecryptUpdate, EVP_DecryptFinal_ex, EVP_CipherInit_ex, EVP_CipherInit_ex2, EVP_CipherUpdate, EVP_CipherFinal_ex, EVP_CIPHER_CTX_set_key_length, EVP_CIPHER_CTX_ctrl, EVP_EncryptInit, EVP_EncryptFinal, EVP_DecryptInit, EVP_DecryptFinal, EVP_CipherInit, EVP_CipherFinal, EVP_Cipher, EVP_get_cipherbyname, EVP_get_cipherbynid, EVP_get_cipherbyobj, EVP_CIPHER_is_a, EVP_CIPHER_get0_name, EVP_CIPHER_get0_description, EVP_CIPHER_names_do_all, EVP_CIPHER_get0_provider, EVP_CIPHER_get_nid, EVP_CIPHER_get_params, EVP_CIPHER_gettable_params, EVP_CIPHER_get_block_size, EVP_CIPHER_get_key_length, EVP_CIPHER_get_iv_length, EVP_CIPHER_get_flags, EVP_CIPHER_get_mode, EVP_CIPHER_get_type, EVP_CIPHER_CTX_cipher, EVP_CIPHER_CTX_get0_cipher, EVP_CIPHER_CTX_get1_cipher, EVP_CIPHER_CTX_get0_name, EVP_CIPHER_CTX_get_nid, EVP_CIPHER_CTX_get_params, EVP_CIPHER_gettable_ctx_params, EVP_CIPHER_CTX_gettable_params, EVP_CIPHER_CTX_set_params, EVP_CIPHER_settable_ctx_params, EVP_CIPHER_CTX_settable_params, EVP_CIPHER_CTX_get_block_size, EVP_CIPHER_CTX_get_key_length, EVP_CIPHER_CTX_get_iv_length, EVP_CIPHER_CTX_get_tag_length, EVP_CIPHER_CTX_get_app_data, EVP_CIPHER_CTX_set_app_data, EVP_CIPHER_CTX_flags, EVP_CIPHER_CTX_set_flags, EVP_CIPHER_CTX_clear_flags, EVP_CIPHER_CTX_test_flags, EVP_CIPHER_CTX_get_type, EVP_CIPHER_CTX_get_mode, EVP_CIPHER_CTX_get_num, EVP_CIPHER_CTX_set_num, EVP_CIPHER_CTX_is_encrypting, EVP_CIPHER_param_to_asn1, EVP_CIPHER_asn1_to_param, EVP_CIPHER_CTX_set_padding, EVP_enc_null, EVP_CIPHER_do_all_provided, EVP_CIPHER_nid, EVP_CIPHER_name, EVP_CIPHER_block_size, EVP_CIPHER_key_length, EVP_CIPHER_iv_length, EVP_CIPHER_flags, EVP_CIPHER_mode, EVP_CIPHER_type, EVP_CIPHER_CTX_encrypting, EVP_CIPHER_CTX_nid, EVP_CIPHER_CTX_block_size, EVP_CIPHER_CTX_key_length, EVP_CIPHER_CTX_iv_length, EVP_CIPHER_CTX_tag_length, EVP_CIPHER_CTX_num, EVP_CIPHER_CTX_type, EVP_CIPHER_CTX_mode - EVP cipher routines =head1 SYNOPSIS =for openssl generic #include EVP_CIPHER *EVP_CIPHER_fetch(OSSL_LIB_CTX *ctx, const char *algorithm, const char *properties); int EVP_CIPHER_up_ref(EVP_CIPHER *cipher); void EVP_CIPHER_free(EVP_CIPHER *cipher); EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void); int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx); void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx); int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, ENGINE *impl, const unsigned char *key, const unsigned char *iv); int EVP_EncryptInit_ex2(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv, const OSSL_PARAM params[]); int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl, const unsigned char *in, int inl); int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl); int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, ENGINE *impl, const unsigned char *key, const unsigned char *iv); int EVP_DecryptInit_ex2(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv, const OSSL_PARAM params[]); int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl, const unsigned char *in, int inl); int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl); int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, ENGINE *impl, const unsigned char *key, const unsigned char *iv, int enc); int EVP_CipherInit_ex2(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv, int enc, const OSSL_PARAM params[]); int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl, const unsigned char *in, int inl); int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl); int EVP_EncryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv); int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl); int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv); int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl); int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, const unsigned char *key, const unsigned char *iv, int enc); int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl); int EVP_Cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl); int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *x, int padding); int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *x, int keylen); int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int cmd, int p1, void *p2); int EVP_CIPHER_CTX_rand_key(EVP_CIPHER_CTX *ctx, unsigned char *key); void EVP_CIPHER_CTX_set_flags(EVP_CIPHER_CTX *ctx, int flags); void EVP_CIPHER_CTX_clear_flags(EVP_CIPHER_CTX *ctx, int flags); int EVP_CIPHER_CTX_test_flags(const EVP_CIPHER_CTX *ctx, int flags); const EVP_CIPHER *EVP_get_cipherbyname(const char *name); const EVP_CIPHER *EVP_get_cipherbynid(int nid); const EVP_CIPHER *EVP_get_cipherbyobj(const ASN1_OBJECT *a); int EVP_CIPHER_get_nid(const EVP_CIPHER *e); int EVP_CIPHER_is_a(const EVP_CIPHER *cipher, const char *name); int EVP_CIPHER_names_do_all(const EVP_CIPHER *cipher, void (*fn)(const char *name, void *data), void *data); const char *EVP_CIPHER_get0_name(const EVP_CIPHER *cipher); const char *EVP_CIPHER_get0_description(const EVP_CIPHER *cipher); const OSSL_PROVIDER *EVP_CIPHER_get0_provider(const EVP_CIPHER *cipher); int EVP_CIPHER_get_block_size(const EVP_CIPHER *e); int EVP_CIPHER_get_key_length(const EVP_CIPHER *e); int EVP_CIPHER_get_iv_length(const EVP_CIPHER *e); unsigned long EVP_CIPHER_get_flags(const EVP_CIPHER *e); unsigned long EVP_CIPHER_get_mode(const EVP_CIPHER *e); int EVP_CIPHER_get_type(const EVP_CIPHER *cipher); const EVP_CIPHER *EVP_CIPHER_CTX_get0_cipher(const EVP_CIPHER_CTX *ctx); EVP_CIPHER *EVP_CIPHER_CTX_get1_cipher(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_nid(const EVP_CIPHER_CTX *ctx); const char *EVP_CIPHER_CTX_get0_name(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_get_params(EVP_CIPHER *cipher, OSSL_PARAM params[]); int EVP_CIPHER_CTX_set_params(EVP_CIPHER_CTX *ctx, const OSSL_PARAM params[]); int EVP_CIPHER_CTX_get_params(EVP_CIPHER_CTX *ctx, OSSL_PARAM params[]); const OSSL_PARAM *EVP_CIPHER_gettable_params(const EVP_CIPHER *cipher); const OSSL_PARAM *EVP_CIPHER_settable_ctx_params(const EVP_CIPHER *cipher); const OSSL_PARAM *EVP_CIPHER_gettable_ctx_params(const EVP_CIPHER *cipher); const OSSL_PARAM *EVP_CIPHER_CTX_settable_params(EVP_CIPHER_CTX *ctx); const OSSL_PARAM *EVP_CIPHER_CTX_gettable_params(EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_block_size(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_key_length(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_iv_length(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_tag_length(const EVP_CIPHER_CTX *ctx); void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx); void EVP_CIPHER_CTX_set_app_data(const EVP_CIPHER_CTX *ctx, void *data); int EVP_CIPHER_CTX_get_type(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_mode(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_get_num(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_CTX_set_num(EVP_CIPHER_CTX *ctx, int num); int EVP_CIPHER_CTX_is_encrypting(const EVP_CIPHER_CTX *ctx); int EVP_CIPHER_param_to_asn1(EVP_CIPHER_CTX *c, ASN1_TYPE *type); int EVP_CIPHER_asn1_to_param(EVP_CIPHER_CTX *c, ASN1_TYPE *type); void EVP_CIPHER_do_all_provided(OSSL_LIB_CTX *libctx, void (*fn)(EVP_CIPHER *cipher, void *arg), void *arg); #define EVP_CIPHER_nid EVP_CIPHER_get_nid #define EVP_CIPHER_name EVP_CIPHER_get0_name #define EVP_CIPHER_block_size EVP_CIPHER_get_block_size #define EVP_CIPHER_key_length EVP_CIPHER_get_key_length #define EVP_CIPHER_iv_length EVP_CIPHER_get_iv_length #define EVP_CIPHER_flags EVP_CIPHER_get_flags #define EVP_CIPHER_mode EVP_CIPHER_get_mode #define EVP_CIPHER_type EVP_CIPHER_get_type #define EVP_CIPHER_CTX_encrypting EVP_CIPHER_CTX_is_encrypting #define EVP_CIPHER_CTX_nid EVP_CIPHER_CTX_get_nid #define EVP_CIPHER_CTX_block_size EVP_CIPHER_CTX_get_block_size #define EVP_CIPHER_CTX_key_length EVP_CIPHER_CTX_get_key_length #define EVP_CIPHER_CTX_iv_length EVP_CIPHER_CTX_get_iv_length #define EVP_CIPHER_CTX_tag_length EVP_CIPHER_CTX_get_tag_length #define EVP_CIPHER_CTX_num EVP_CIPHER_CTX_get_num #define EVP_CIPHER_CTX_type EVP_CIPHER_CTX_get_type #define EVP_CIPHER_CTX_mode EVP_CIPHER_CTX_get_mode The following function has been deprecated since OpenSSL 3.0, and can be hidden entirely by defining B with a suitable version value, see L: const EVP_CIPHER *EVP_CIPHER_CTX_cipher(const EVP_CIPHER_CTX *ctx); The following function has been deprecated since OpenSSL 1.1.0, and can be hidden entirely by defining B with a suitable version value, see L: int EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx); =head1 DESCRIPTION The EVP cipher routines are a high-level interface to certain symmetric ciphers. The B type is a structure for cipher method implementation. =over 4 =item EVP_CIPHER_fetch() Fetches the cipher implementation for the given I from any provider offering it, within the criteria given by the I. See L for further information. The returned value must eventually be freed with EVP_CIPHER_free(). Fetched B structures are reference counted. =item EVP_CIPHER_up_ref() Increments the reference count for an B structure. =item EVP_CIPHER_free() Decrements the reference count for the fetched B structure. If the reference count drops to 0 then the structure is freed. =item EVP_CIPHER_CTX_new() Allocates and returns a cipher context. =item EVP_CIPHER_CTX_free() Clears all information from a cipher context and frees any allocated memory associated with it, including I itself. This function should be called after all operations using a cipher are complete so sensitive information does not remain in memory. =item EVP_CIPHER_CTX_ctrl() I EVP_CIPHER_CTX_set_params() and EVP_CIPHER_CTX_get_params() is the mechanism that should be used to set and get parameters that are used by providers. Performs cipher-specific control actions on context I. The control command is indicated in I and any additional arguments in I and I. EVP_CIPHER_CTX_ctrl() must be called after EVP_CipherInit_ex2(). Other restrictions may apply depending on the control type and cipher implementation. If this function happens to be used with a fetched B, it will translate the controls that are known to OpenSSL into L parameters with keys defined by OpenSSL and call EVP_CIPHER_CTX_get_params() or EVP_CIPHER_CTX_set_params() as is appropriate for each control command. See L below for more information, including what translations are being done. =item EVP_CIPHER_get_params() Retrieves the requested list of algorithm I from a CIPHER I. See L below for more information. =item EVP_CIPHER_CTX_get_params() Retrieves the requested list of I from CIPHER context I. See L below for more information. =item EVP_CIPHER_CTX_set_params() Sets the list of I into a CIPHER context I. See L below for more information. =item EVP_CIPHER_gettable_params() Get a constant L array that describes the retrievable parameters that can be used with EVP_CIPHER_get_params(). =item EVP_CIPHER_gettable_ctx_params() and EVP_CIPHER_CTX_gettable_params() Get a constant L array that describes the retrievable parameters that can be used with EVP_CIPHER_CTX_get_params(). EVP_CIPHER_gettable_ctx_params() returns the parameters that can be retrieved from the algorithm, whereas EVP_CIPHER_CTX_gettable_params() returns the parameters that can be retrieved in the context's current state. =item EVP_CIPHER_settable_ctx_params() and EVP_CIPHER_CTX_settable_params() Get a constant L array that describes the settable parameters that can be used with EVP_CIPHER_CTX_set_params(). EVP_CIPHER_settable_ctx_params() returns the parameters that can be set from the algorithm, whereas EVP_CIPHER_CTX_settable_params() returns the parameters that can be set in the context's current state. =item EVP_EncryptInit_ex2() Sets up cipher context I for encryption with cipher I. I is typically supplied by calling EVP_CIPHER_fetch(). I may also be set using legacy functions such as EVP_aes_256_cbc(), but this is not recommended for new applications. I is the symmetric key to use and I is the IV to use (if necessary), the actual number of bytes used for the key and IV depends on the cipher. The parameters I will be set on the context after initialisation. It is possible to set all parameters to NULL except I in an initial call and supply the remaining parameters in subsequent calls, all of which have I set to NULL. This is done when the default cipher parameters are not appropriate. For B the IV will be generated internally if it is not specified. =item EVP_EncryptInit_ex() This legacy function is similar to EVP_EncryptInit_ex2() when I is NULL. The implementation of the I from the I engine will be used if it exists. =item EVP_EncryptUpdate() Encrypts I bytes from the buffer I and writes the encrypted version to I. This function can be called multiple times to encrypt successive blocks of data. The amount of data written depends on the block alignment of the encrypted data. For most ciphers and modes, the amount of data written can be anything from zero bytes to (inl + cipher_block_size - 1) bytes. For wrap cipher modes, the amount of data written can be anything from zero bytes to (inl + cipher_block_size) bytes. For stream ciphers, the amount of data written can be anything from zero bytes to inl bytes. Thus, I should contain sufficient room for the operation being performed. The actual number of bytes written is placed in I. It also checks if I and I are partially overlapping, and if they are 0 is returned to indicate failure. If padding is enabled (the default) then EVP_EncryptFinal_ex() encrypts the "final" data, that is any data that remains in a partial block. It uses standard block padding (aka PKCS padding) as described in the NOTES section, below. The encrypted final data is written to I which should have sufficient space for one cipher block. The number of bytes written is placed in I. After this function is called the encryption operation is finished and no further calls to EVP_EncryptUpdate() should be made. If padding is disabled then EVP_EncryptFinal_ex() will not encrypt any more data and it will return an error if any data remains in a partial block: that is if the total data length is not a multiple of the block size. =item EVP_DecryptInit_ex2(), EVP_DecryptInit_ex(), EVP_DecryptUpdate() and EVP_DecryptFinal_ex() These functions are the corresponding decryption operations. EVP_DecryptFinal() will return an error code if padding is enabled and the final block is not correctly formatted. The parameters and restrictions are identical to the encryption operations except that if padding is enabled the decrypted data buffer I passed to EVP_DecryptUpdate() should have sufficient room for (I + cipher_block_size) bytes unless the cipher block size is 1 in which case I bytes is sufficient. =item EVP_CipherInit_ex2(), EVP_CipherInit_ex(), EVP_CipherUpdate() and EVP_CipherFinal_ex() These functions can be used for decryption or encryption. The operation performed depends on the value of the I parameter. It should be set to 1 for encryption, 0 for decryption and -1 to leave the value unchanged (the actual value of 'enc' being supplied in a previous call). =item EVP_CIPHER_CTX_reset() Clears all information from a cipher context and free up any allocated memory associated with it, except the I itself. This function should be called anytime I is reused by another EVP_CipherInit() / EVP_CipherUpdate() / EVP_CipherFinal() series of calls. =item EVP_EncryptInit(), EVP_DecryptInit() and EVP_CipherInit() Behave in a similar way to EVP_EncryptInit_ex(), EVP_DecryptInit_ex() and EVP_CipherInit_ex() except if the I is not a fetched cipher they use the default implementation of the I. =item EVP_EncryptFinal(), EVP_DecryptFinal() and EVP_CipherFinal() Identical to EVP_EncryptFinal_ex(), EVP_DecryptFinal_ex() and EVP_CipherFinal_ex(). In previous releases they also cleaned up the I, but this is no longer done and EVP_CIPHER_CTX_cleanup() must be called to free any context resources. =item EVP_Cipher() Encrypts or decrypts a maximum I amount of bytes from I and leaves the result in I. For legacy ciphers - If the cipher doesn't have the flag B set, then I must be a multiple of EVP_CIPHER_get_block_size(). If it isn't, the result is undefined. If the cipher has that flag set, then I can be any size. Due to the constraints of the API contract of this function it shouldn't be used in applications, please consider using EVP_CipherUpdate() and EVP_CipherFinal_ex() instead. =item EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() Returns an B structure when passed a cipher name, a cipher B or an B structure respectively. EVP_get_cipherbyname() will return NULL for algorithms such as "AES-128-SIV", "AES-128-CBC-CTS" and "CAMELLIA-128-CBC-CTS" which were previously only accessible via low level interfaces. The EVP_get_cipherbyname() function is present for backwards compatibility with OpenSSL prior to version 3 and is different to the EVP_CIPHER_fetch() function since it does not attempt to "fetch" an implementation of the cipher. Additionally, it only knows about ciphers that are built-in to OpenSSL and have an associated NID. Similarly EVP_get_cipherbynid() and EVP_get_cipherbyobj() also return objects without an associated implementation. When the cipher objects returned by these functions are used (such as in a call to EVP_EncryptInit_ex()) an implementation of the cipher will be implicitly fetched from the loaded providers. This fetch could fail if no suitable implementation is available. Use EVP_CIPHER_fetch() instead to explicitly fetch the algorithm and an associated implementation from a provider. See L for more information about fetching. The cipher objects returned from these functions do not need to be freed with EVP_CIPHER_free(). =item EVP_CIPHER_get_nid() and EVP_CIPHER_CTX_get_nid() Return the NID of a cipher when passed an B or B structure. The actual NID value is an internal value which may not have a corresponding OBJECT IDENTIFIER. =item EVP_CIPHER_CTX_set_flags(), EVP_CIPHER_CTX_clear_flags() and EVP_CIPHER_CTX_test_flags() Sets, clears and tests I flags. See L below for more information. For provided ciphers EVP_CIPHER_CTX_set_flags() should be called only after the fetched cipher has been assigned to the I. It is recommended to use L instead. =item EVP_CIPHER_CTX_set_padding() Enables or disables padding. This function should be called after the context is set up for encryption or decryption with EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2(). By default encryption operations are padded using standard block padding and the padding is checked and removed when decrypting. If the I parameter is zero then no padding is performed, the total amount of data encrypted or decrypted must then be a multiple of the block size or an error will occur. =item EVP_CIPHER_get_key_length() and EVP_CIPHER_CTX_get_key_length() Return the key length of a cipher when passed an B or B structure. The constant B is the maximum key length for all ciphers. Note: although EVP_CIPHER_get_key_length() is fixed for a given cipher, the value of EVP_CIPHER_CTX_get_key_length() may be different for variable key length ciphers. =item EVP_CIPHER_CTX_set_key_length() Sets the key length of the cipher context. If the cipher is a fixed length cipher then attempting to set the key length to any value other than the fixed value is an error. =item EVP_CIPHER_get_iv_length() and EVP_CIPHER_CTX_get_iv_length() Return the IV length of a cipher when passed an B or B. It will return zero if the cipher does not use an IV. The constant B is the maximum IV length for all ciphers. =item EVP_CIPHER_CTX_get_tag_length() Returns the tag length of an AEAD cipher when passed a B. It will return zero if the cipher does not support a tag. It returns a default value if the tag length has not been set. =item EVP_CIPHER_get_block_size() and EVP_CIPHER_CTX_get_block_size() Return the block size of a cipher when passed an B or B structure. The constant B is also the maximum block length for all ciphers. =item EVP_CIPHER_get_type() and EVP_CIPHER_CTX_get_type() Return the type of the passed cipher or context. This "type" is the actual NID of the cipher OBJECT IDENTIFIER and as such it ignores the cipher parameters (40 bit RC2 and 128 bit RC2 have the same NID). If the cipher does not have an object identifier or does not have ASN1 support this function will return B. =item EVP_CIPHER_is_a() Returns 1 if I is an implementation of an algorithm that's identifiable with I, otherwise 0. If I is a legacy cipher (it's the return value from the likes of EVP_aes128() rather than the result of an EVP_CIPHER_fetch()), only cipher names registered with the default library context (see L) will be considered. =item EVP_CIPHER_get0_name() and EVP_CIPHER_CTX_get0_name() Return the name of the passed cipher or context. For fetched ciphers with multiple names, only one of them is returned. See also EVP_CIPHER_names_do_all(). =item EVP_CIPHER_names_do_all() Traverses all names for the I, and calls I with each name and I. This is only useful with fetched Bs. =item EVP_CIPHER_get0_description() Returns a description of the cipher, meant for display and human consumption. The description is at the discretion of the cipher implementation. =item EVP_CIPHER_get0_provider() Returns an B pointer to the provider that implements the given B. =item EVP_CIPHER_CTX_get0_cipher() Returns the B structure when passed an B structure. EVP_CIPHER_CTX_get1_cipher() is the same except the ownership is passed to the caller. =item EVP_CIPHER_get_mode() and EVP_CIPHER_CTX_get_mode() Return the block cipher mode: EVP_CIPH_ECB_MODE, EVP_CIPH_CBC_MODE, EVP_CIPH_CFB_MODE, EVP_CIPH_OFB_MODE, EVP_CIPH_CTR_MODE, EVP_CIPH_GCM_MODE, EVP_CIPH_CCM_MODE, EVP_CIPH_XTS_MODE, EVP_CIPH_WRAP_MODE, EVP_CIPH_OCB_MODE or EVP_CIPH_SIV_MODE. If the cipher is a stream cipher then EVP_CIPH_STREAM_CIPHER is returned. =item EVP_CIPHER_get_flags() Returns any flags associated with the cipher. See L for a list of currently defined flags. =item EVP_CIPHER_CTX_get_num() and EVP_CIPHER_CTX_set_num() Gets or sets the cipher specific "num" parameter for the associated I. Built-in ciphers typically use this to track how much of the current underlying block has been "used" already. =item EVP_CIPHER_CTX_is_encrypting() Reports whether the I is being used for encryption or decryption. =item EVP_CIPHER_CTX_flags() A deprecated macro calling C. Do not use. =item EVP_CIPHER_param_to_asn1() Sets the AlgorithmIdentifier "parameter" based on the passed cipher. This will typically include any parameters and an IV. The cipher IV (if any) must be set when this call is made. This call should be made before the cipher is actually "used" (before any EVP_EncryptUpdate(), EVP_DecryptUpdate() calls for example). This function may fail if the cipher does not have any ASN1 support. =item EVP_CIPHER_asn1_to_param() Sets the cipher parameters based on an ASN1 AlgorithmIdentifier "parameter". The precise effect depends on the cipher. In the case of B, for example, it will set the IV and effective key length. This function should be called after the base cipher type is set but before the key is set. For example EVP_CipherInit() will be called with the IV and key set to NULL, EVP_CIPHER_asn1_to_param() will be called and finally EVP_CipherInit() again with all parameters except the key set to NULL. It is possible for this function to fail if the cipher does not have any ASN1 support or the parameters cannot be set (for example the RC2 effective key length is not supported. =item EVP_CIPHER_CTX_rand_key() Generates a random key of the appropriate length based on the cipher context. The B can provide its own random key generation routine to support keys of a specific form. I must point to a buffer at least as big as the value returned by EVP_CIPHER_CTX_get_key_length(). =item EVP_CIPHER_do_all_provided() Traverses all ciphers implemented by all activated providers in the given library context I, and for each of the implementations, calls the given function I with the implementation method and the given I as argument. =back =head1 PARAMETERS See L for information about passing parameters. =head2 Gettable EVP_CIPHER parameters When EVP_CIPHER_fetch() is called it internally calls EVP_CIPHER_get_params() and caches the results. EVP_CIPHER_get_params() can be used with the following L keys: =over 4 =item "mode" (B) Gets the mode for the associated cipher algorithm I. See L for a list of valid modes. Use EVP_CIPHER_get_mode() to retrieve the cached value. =item "keylen" (B) Gets the key length for the associated cipher algorithm I. Use EVP_CIPHER_get_key_length() to retrieve the cached value. =item "ivlen" (B) Gets the IV length for the associated cipher algorithm I. Use EVP_CIPHER_get_iv_length() to retrieve the cached value. =item "blocksize" (B) Gets the block size for the associated cipher algorithm I. The block size should be 1 for stream ciphers. Note that the block size for a cipher may be different to the block size for the underlying encryption/decryption primitive. For example AES in CTR mode has a block size of 1 (because it operates like a stream cipher), even though AES has a block size of 16. Use EVP_CIPHER_get_block_size() to retrieve the cached value. =item "aead" (B) Gets 1 if this is an AEAD cipher algorithm, otherwise it gets 0. Use (EVP_CIPHER_get_flags(cipher) & EVP_CIPH_FLAG_AEAD_CIPHER) to retrieve the cached value. =item "custom-iv" (B) Gets 1 if the cipher algorithm I has a custom IV, otherwise it gets 0. Storing and initializing the IV is left entirely to the implementation, if a custom IV is used. Use (EVP_CIPHER_get_flags(cipher) & EVP_CIPH_CUSTOM_IV) to retrieve the cached value. =item "cts" (B) Gets 1 if the cipher algorithm I uses ciphertext stealing, otherwise it gets 0. This is currently used to indicate that the cipher is a one shot that only allows a single call to EVP_CipherUpdate(). Use (EVP_CIPHER_get_flags(cipher) & EVP_CIPH_FLAG_CTS) to retrieve the cached value. =item "tls-multi" (B) Gets 1 if the cipher algorithm I supports interleaving of crypto blocks, otherwise it gets 0. The interleaving is an optimization only applicable to certain TLS ciphers. Use (EVP_CIPHER_get_flags(cipher) & EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK) to retrieve the cached value. =item "has-randkey" (B) Gets 1 if the cipher algorithm I supports the gettable EVP_CIPHER_CTX parameter B. Only DES and 3DES set this to 1, all other OpenSSL ciphers return 0. =back =head2 Gettable and Settable EVP_CIPHER_CTX parameters The following L keys can be used with both EVP_CIPHER_CTX_get_params() and EVP_CIPHER_CTX_set_params(). =over 4 =item "padding" (B) Gets or sets the padding mode for the cipher context I. Padding is enabled if the value is 1, and disabled if the value is 0. See also EVP_CIPHER_CTX_set_padding(). =item "num" (B) Gets or sets the cipher specific "num" parameter for the cipher context I. Built-in ciphers typically use this to track how much of the current underlying block has been "used" already. See also EVP_CIPHER_CTX_get_num() and EVP_CIPHER_CTX_set_num(). =item "keylen" (B) Gets or sets the key length for the cipher context I. The length of the "keylen" parameter should not exceed that of a B. See also EVP_CIPHER_CTX_get_key_length() and EVP_CIPHER_CTX_set_key_length(). =item "tag" (B) Gets or sets the AEAD tag for the associated cipher context I. See L. =item "keybits" (B) Gets or sets the effective keybits used for a RC2 cipher. The length of the "keybits" parameter should not exceed that of a B. =item "rounds" (B) Gets or sets the number of rounds to be used for a cipher. This is used by the RC5 cipher. =item "alg_id_param" (B) Used to pass the DER encoded AlgorithmIdentifier parameter to or from the cipher implementation. Functions like L and L use this parameter for any implementation that has the flag B set. =item "cts_mode" (B) Gets or sets the cipher text stealing mode. For all modes the output size is the same as the input size. The input length must be greater than or equal to the block size. (The block size for AES and CAMELLIA is 16 bytes). Valid values for the mode are: =over 4 =item "CS1" The NIST variant of cipher text stealing. For input lengths that are multiples of the block size it is equivalent to using a "AES-XXX-CBC" or "CAMELLIA-XXX-CBC" cipher otherwise the second last cipher text block is a partial block. =item "CS2" For input lengths that are multiples of the block size it is equivalent to using a "AES-XXX-CBC" or "CAMELLIA-XXX-CBC" cipher, otherwise it is the same as "CS3" mode. =item "CS3" The Kerberos5 variant of cipher text stealing which always swaps the last cipher text block with the previous block (which may be a partial or full block depending on the input length). If the input length is exactly one full block then this is equivalent to using a "AES-XXX-CBC" or "CAMELLIA-XXX-CBC" cipher. =back The default is "CS1". This is only supported for "AES-128-CBC-CTS", "AES-192-CBC-CTS", "AES-256-CBC-CTS", "CAMELLIA-128-CBC-CTS", "CAMELLIA-192-CBC-CTS" and "CAMELLIA-256-CBC-CTS". =item "tls1multi_interleave" (B) Sets or gets the number of records being sent in one go for a tls1 multiblock cipher operation (either 4 or 8 records). =back =head2 Gettable EVP_CIPHER_CTX parameters The following L keys can be used with EVP_CIPHER_CTX_get_params(): =over 4 =item "ivlen" (B and ) Gets the IV length for the cipher context I. The length of the "ivlen" parameter should not exceed that of a B. See also EVP_CIPHER_CTX_get_iv_length(). =item "iv" (B) Gets the IV used to initialize the associated cipher context I. See also EVP_CIPHER_CTX_get_original_iv(). =item "updated-iv" (B) Gets the updated pseudo-IV state for the associated cipher context, e.g., the previous ciphertext block for CBC mode or the iteratively encrypted IV value for OFB mode. Note that octet pointer access is deprecated and is provided only for backwards compatibility with historical libcrypto APIs. See also EVP_CIPHER_CTX_get_updated_iv(). =item "randkey" (B) Gets an implementation specific randomly generated key for the associated cipher context I. This is currently only supported by DES and 3DES (which set the key to odd parity). =item "taglen" (B) Gets the tag length to be used for an AEAD cipher for the associated cipher context I. It gets a default value if it has not been set. The length of the "taglen" parameter should not exceed that of a B. See also EVP_CIPHER_CTX_get_tag_length(). =item "tlsaadpad" (B) Gets the length of the tag that will be added to a TLS record for the AEAD tag for the associated cipher context I. The length of the "tlsaadpad" parameter should not exceed that of a B. =item "tlsivgen" (B) Gets the invocation field generated for encryption. Can only be called after "tlsivfixed" is set. This is only used for GCM mode. =item "tls1multi_enclen" (B) Get the total length of the record returned from the "tls1multi_enc" operation. =item "tls1multi_maxbufsz" (B) Gets the maximum record length for a TLS1 multiblock cipher operation. The length of the "tls1multi_maxbufsz" parameter should not exceed that of a B. =item "tls1multi_aadpacklen" (B) Gets the result of running the "tls1multi_aad" operation. =item "tls-mac" (B) Used to pass the TLS MAC data. =back =head2 Settable EVP_CIPHER_CTX parameters The following L keys can be used with EVP_CIPHER_CTX_set_params(): =over 4 =item "mackey" (B) Sets the MAC key used by composite AEAD ciphers such as AES-CBC-HMAC-SHA256. =item "speed" (B) Sets the speed option for the associated cipher context. This is only supported by AES SIV ciphers which disallow multiple operations by default. Setting "speed" to 1 allows another encrypt or decrypt operation to be performed. This is used for performance testing. =item "use-bits" (B) Determines if the input length I passed to EVP_EncryptUpdate(), EVP_DecryptUpdate() and EVP_CipherUpdate() is the number of bits or number of bytes. Setting "use-bits" to 1 uses bits. The default is in bytes. This is only used for B ciphers. This can be set using EVP_CIPHER_CTX_set_flags(ctx, EVP_CIPH_FLAG_LENGTH_BITS). =item "tls-version" (B) Sets the TLS version. =item "tls-mac-size" (B) Set the TLS MAC size. =item "tlsaad" (B) Sets TLSv1.2 AAD information for the associated cipher context I. TLSv1.2 AAD information is always 13 bytes in length and is as defined for the "additional_data" field described in section 6.2.3.3 of RFC5246. =item "tlsivfixed" (B) Sets the fixed portion of an IV for an AEAD cipher used in a TLS record encryption/ decryption for the associated cipher context. TLS record encryption/decryption always occurs "in place" so that the input and output buffers are always the same memory location. AEAD IVs in TLSv1.2 consist of an implicit "fixed" part and an explicit part that varies with every record. Setting a TLS fixed IV changes a cipher to encrypt/decrypt TLS records. TLS records are encrypted/decrypted using a single OSSL_FUNC_cipher_cipher call per record. For a record decryption the first bytes of the input buffer will be the explicit part of the IV and the final bytes of the input buffer will be the AEAD tag. The length of the explicit part of the IV and the tag length will depend on the cipher in use and will be defined in the RFC for the relevant ciphersuite. In order to allow for "in place" decryption the plaintext output should be written to the same location in the output buffer that the ciphertext payload was read from, i.e. immediately after the explicit IV. When encrypting a record the first bytes of the input buffer should be empty to allow space for the explicit IV, as will the final bytes where the tag will be written. The length of the input buffer will include the length of the explicit IV, the payload, and the tag bytes. The cipher implementation should generate the explicit IV and write it to the beginning of the output buffer, do "in place" encryption of the payload and write that to the output buffer, and finally add the tag onto the end of the output buffer. Whether encrypting or decrypting the value written to I<*outl> in the OSSL_FUNC_cipher_cipher call should be the length of the payload excluding the explicit IV length and the tag length. =item "tlsivinv" (B) Sets the invocation field used for decryption. Can only be called after "tlsivfixed" is set. This is only used for GCM mode. =item "tls1multi_enc" (B) Triggers a multiblock TLS1 encrypt operation for a TLS1 aware cipher that supports sending 4 or 8 records in one go. The cipher performs both the MAC and encrypt stages and constructs the record headers itself. "tls1multi_enc" supplies the output buffer for the encrypt operation, "tls1multi_encin" & "tls1multi_interleave" must also be set in order to supply values to the encrypt operation. =item "tls1multi_encin" (B) Supplies the data to encrypt for a TLS1 multiblock cipher operation. =item "tls1multi_maxsndfrag" (B) Sets the maximum send fragment size for a TLS1 multiblock cipher operation. It must be set before using "tls1multi_maxbufsz". The length of the "tls1multi_maxsndfrag" parameter should not exceed that of a B. =item "tls1multi_aad" (B) Sets the authenticated additional data used by a TLS1 multiblock cipher operation. The supplied data consists of 13 bytes of record data containing: Bytes 0-7: The sequence number of the first record Byte 8: The record type Byte 9-10: The protocol version Byte 11-12: Input length (Always 0) "tls1multi_interleave" must also be set for this operation. =back =head1 CONTROLS The Mappings from EVP_CIPHER_CTX_ctrl() identifiers to PARAMETERS are listed in the following section. See the L section for more details. EVP_CIPHER_CTX_ctrl() can be used to send the following standard controls: =over 4 =item EVP_CTRL_AEAD_SET_IVLEN and EVP_CTRL_GET_IVLEN When used with a fetched B, EVP_CIPHER_CTX_set_params() and EVP_CIPHER_CTX_get_params() get called with an L item with the key "ivlen" (B). =item EVP_CTRL_AEAD_SET_IV_FIXED When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "tlsivfixed" (B). =item EVP_CTRL_AEAD_SET_MAC_KEY When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "mackey" (B). =item EVP_CTRL_AEAD_SET_TAG and EVP_CTRL_AEAD_GET_TAG When used with a fetched B, EVP_CIPHER_CTX_set_params() and EVP_CIPHER_CTX_get_params() get called with an L item with the key "tag" (B). =item EVP_CTRL_CCM_SET_L When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "ivlen" (B) with a value of (15 - L) =item EVP_CTRL_COPY There is no OSSL_PARAM mapping for this. Use EVP_CIPHER_CTX_copy() instead. =item EVP_CTRL_GCM_SET_IV_INV When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "tlsivinv" (B). =item EVP_CTRL_RAND_KEY When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "randkey" (B). =item EVP_CTRL_SET_KEY_LENGTH When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "keylen" (B). =item EVP_CTRL_SET_RC2_KEY_BITS and EVP_CTRL_GET_RC2_KEY_BITS When used with a fetched B, EVP_CIPHER_CTX_set_params() and EVP_CIPHER_CTX_get_params() get called with an L item with the key "keybits" (B). =item EVP_CTRL_SET_RC5_ROUNDS and EVP_CTRL_GET_RC5_ROUNDS When used with a fetched B, EVP_CIPHER_CTX_set_params() and EVP_CIPHER_CTX_get_params() get called with an L item with the key "rounds" (B). =item EVP_CTRL_SET_SPEED When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key "speed" (B). =item EVP_CTRL_GCM_IV_GEN When used with a fetched B, EVP_CIPHER_CTX_get_params() gets called with an L item with the key "tlsivgen" (B). =item EVP_CTRL_AEAD_TLS1_AAD When used with a fetched B, EVP_CIPHER_CTX_set_params() get called with an L item with the key "tlsaad" (B) followed by EVP_CIPHER_CTX_get_params() with a key of "tlsaadpad" (B). =item EVP_CTRL_TLS1_1_MULTIBLOCK_MAX_BUFSIZE When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with an L item with the key OSSL_CIPHER_PARAM_TLS1_MULTIBLOCK_MAX_SEND_FRAGMENT followed by EVP_CIPHER_CTX_get_params() with a key of "tls1multi_maxbufsz" (B). =item EVP_CTRL_TLS1_1_MULTIBLOCK_AAD When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with L items with the keys "tls1multi_aad" (B) and "tls1multi_interleave" (B) followed by EVP_CIPHER_CTX_get_params() with keys of "tls1multi_aadpacklen" (B) and "tls1multi_interleave" (B). =item EVP_CTRL_TLS1_1_MULTIBLOCK_ENCRYPT When used with a fetched B, EVP_CIPHER_CTX_set_params() gets called with L items with the keys "tls1multi_enc" (B), "tls1multi_encin" (B) and "tls1multi_interleave" (B), followed by EVP_CIPHER_CTX_get_params() with a key of "tls1multi_enclen" (B). =back =head1 FLAGS EVP_CIPHER_CTX_set_flags(), EVP_CIPHER_CTX_clear_flags() and EVP_CIPHER_CTX_test_flags(). can be used to manipulate and test these B flags: =over 4 =item EVP_CIPH_NO_PADDING Used by EVP_CIPHER_CTX_set_padding(). See also L "padding" =item EVP_CIPH_FLAG_LENGTH_BITS See L "use-bits". =item EVP_CIPHER_CTX_FLAG_WRAP_ALLOW Used for Legacy purposes only. This flag needed to be set to indicate the cipher handled wrapping. =back EVP_CIPHER_flags() uses the following flags that have mappings to L: =over 4 =item EVP_CIPH_FLAG_AEAD_CIPHER See L "aead". =item EVP_CIPH_CUSTOM_IV See L "custom-iv". =item EVP_CIPH_FLAG_CTS See L "cts". =item EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK; See L "tls-multi". =item EVP_CIPH_RAND_KEY See L "has-randkey". =back EVP_CIPHER_flags() uses the following flags for legacy purposes only: =over 4 =item EVP_CIPH_VARIABLE_LENGTH =item EVP_CIPH_FLAG_CUSTOM_CIPHER =item EVP_CIPH_ALWAYS_CALL_INIT =item EVP_CIPH_CTRL_INIT =item EVP_CIPH_CUSTOM_KEY_LENGTH =item EVP_CIPH_CUSTOM_COPY =item EVP_CIPH_FLAG_DEFAULT_ASN1 See L for further information related to the above flags. =back =head1 RETURN VALUES EVP_CIPHER_fetch() returns a pointer to a B for success and B for failure. EVP_CIPHER_up_ref() returns 1 for success or 0 otherwise. EVP_CIPHER_CTX_new() returns a pointer to a newly created B for success and B for failure. EVP_EncryptInit_ex2(), EVP_EncryptUpdate() and EVP_EncryptFinal_ex() return 1 for success and 0 for failure. EVP_DecryptInit_ex2() and EVP_DecryptUpdate() return 1 for success and 0 for failure. EVP_DecryptFinal_ex() returns 0 if the decrypt failed or 1 for success. EVP_CipherInit_ex2() and EVP_CipherUpdate() return 1 for success and 0 for failure. EVP_CipherFinal_ex() returns 0 for a decryption failure or 1 for success. EVP_Cipher() returns 1 on success or 0 on failure, if the flag B is not set for the cipher. EVP_Cipher() returns the number of bytes written to I for encryption / decryption, or the number of bytes authenticated in a call specifying AAD for an AEAD cipher, if the flag B is set for the cipher. EVP_CIPHER_CTX_reset() returns 1 for success and 0 for failure. EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() return an B structure or NULL on error. EVP_CIPHER_get_nid() and EVP_CIPHER_CTX_get_nid() return a NID. EVP_CIPHER_get_block_size() and EVP_CIPHER_CTX_get_block_size() return the block size. EVP_CIPHER_get_key_length() and EVP_CIPHER_CTX_get_key_length() return the key length. EVP_CIPHER_CTX_set_padding() always returns 1. EVP_CIPHER_get_iv_length() and EVP_CIPHER_CTX_get_iv_length() return the IV length or zero if the cipher does not use an IV. EVP_CIPHER_CTX_get_tag_length() return the tag length or zero if the cipher does not use a tag. EVP_CIPHER_get_type() and EVP_CIPHER_CTX_get_type() return the NID of the cipher's OBJECT IDENTIFIER or NID_undef if it has no defined OBJECT IDENTIFIER. EVP_CIPHER_CTX_cipher() returns an B structure. EVP_CIPHER_CTX_get_num() returns a nonnegative num value or B if the implementation does not support the call or on any other error. EVP_CIPHER_CTX_set_num() returns 1 on success and 0 if the implementation does not support the call or on any other error. EVP_CIPHER_CTX_is_encrypting() returns 1 if the I is set up for encryption 0 otherwise. EVP_CIPHER_param_to_asn1() and EVP_CIPHER_asn1_to_param() return greater than zero for success and zero or a negative number on failure. EVP_CIPHER_CTX_rand_key() returns 1 for success and zero or a negative number for failure. EVP_CIPHER_names_do_all() returns 1 if the callback was called for all names. A return value of 0 means that the callback was not called for any names. =head1 CIPHER LISTING All algorithms have a fixed key length unless otherwise stated. Refer to L for the full list of ciphers available through the EVP interface. =over 4 =item EVP_enc_null() Null cipher: does nothing. =back =head1 AEAD INTERFACE The EVP interface for Authenticated Encryption with Associated Data (AEAD) modes are subtly altered and several additional I operations are supported depending on the mode specified. To specify additional authenticated data (AAD), a call to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() should be made with the output parameter I set to B. In this case, on success, the parameter I is set to the number of bytes authenticated. When decrypting, the return value of EVP_DecryptFinal() or EVP_CipherFinal() indicates whether the operation was successful. If it does not indicate success, the authentication operation has failed and any output data B be used as it is corrupted. =head2 GCM and OCB Modes The following Is are supported in GCM and OCB modes. =over 4 =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN, ivlen, NULL) Sets the IV length. This call can only be made before specifying an IV. If not called a default IV length is used. For GCM AES and OCB AES the default is 12 (i.e. 96 bits). For OCB mode the maximum is 15. =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_GET_TAG, taglen, tag) Writes C bytes of the tag value to the buffer indicated by C. This call can only be made when encrypting data and B all data has been processed (e.g. after an EVP_EncryptFinal() call). For OCB, C must either be 16 or the value previously set via B. =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, taglen, tag) When decrypting, this call sets the expected tag to C bytes from C. C must be between 1 and 16 inclusive. The tag must be set prior to any call to EVP_DecryptFinal() or EVP_DecryptFinal_ex(). For GCM, this call is only valid when decrypting data. For OCB, this call is valid when decrypting data to set the expected tag, and when encrypting to set the desired tag length. In OCB mode, calling this when encrypting with C set to C sets the tag length. The tag length can only be set before specifying an IV. If this is not called prior to setting the IV during encryption, then a default tag length is used. For OCB AES, the default tag length is 16 (i.e. 128 bits). It is also the maximum tag length for OCB. =back =head2 CCM Mode The EVP interface for CCM mode is similar to that of the GCM mode but with a few additional requirements and different I values. For CCM mode, the total plaintext or ciphertext length B be passed to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() with the output and input parameters (I and I) set to B and the length passed in the I parameter. The following Is are supported in CCM mode. =over 4 =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, taglen, tag) This call is made to set the expected B tag value when decrypting or the length of the tag (with the C parameter set to NULL) when encrypting. The tag length is often referred to as B. If not set a default value is used (12 for AES). When decrypting, the tag needs to be set before passing in data to be decrypted, but as in GCM and OCB mode, it can be set after passing additional authenticated data (see L). =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_SET_L, ivlen, NULL) Sets the CCM B value. If not set a default is used (8 for AES). =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN, ivlen, NULL) Sets the CCM nonce (IV) length. This call can only be made before specifying a nonce value. The nonce length is given by B<15 - L> so it is 7 by default for AES. =back =head2 SIV Mode For SIV mode ciphers the behaviour of the EVP interface is subtly altered and several additional ctrl operations are supported. To specify any additional authenticated data (AAD) and/or a Nonce, a call to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() should be made with the output parameter I set to B. RFC5297 states that the Nonce is the last piece of AAD before the actual encrypt/decrypt takes place. The API does not differentiate the Nonce from other AAD. When decrypting the return value of EVP_DecryptFinal() or EVP_CipherFinal() indicates if the operation was successful. If it does not indicate success the authentication operation has failed and any output data B be used as it is corrupted. The API does not store the the SIV (Synthetic Initialization Vector) in the cipher text. Instead, it is stored as the tag within the EVP_CIPHER_CTX. The SIV must be retrieved from the context after encryption, and set into the context before decryption. This differs from RFC5297 in that the cipher output from encryption, and the cipher input to decryption, does not contain the SIV. This also means that the plain text and cipher text lengths are identical. The following ctrls are supported in SIV mode, and are used to get and set the Synthetic Initialization Vector: =over 4 =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_GET_TAG, taglen, tag); Writes I bytes of the tag value (the Synthetic Initialization Vector) to the buffer indicated by I. This call can only be made when encrypting data and B all data has been processed (e.g. after an EVP_EncryptFinal() call). For SIV mode the taglen must be 16. =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, taglen, tag); Sets the expected tag (the Synthetic Initialization Vector) to I bytes from I. This call is only legal when decrypting data and must be made B any data is processed (e.g. before any EVP_DecryptUpdate() calls). For SIV mode the taglen must be 16. =back SIV mode makes two passes over the input data, thus, only one call to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() should be made with I set to a non-B value. A call to EVP_DecryptFinal() or EVP_CipherFinal() is not required, but will indicate if the update operation succeeded. =head2 ChaCha20-Poly1305 The following Is are supported for the ChaCha20-Poly1305 AEAD algorithm. =over 4 =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN, ivlen, NULL) Sets the nonce length. This call is now redundant since the only valid value is the default length of 12 (i.e. 96 bits). Prior to OpenSSL 3.0 a nonce of less than 12 bytes could be used to automatically pad the iv with leading 0 bytes to make it 12 bytes in length. =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_GET_TAG, taglen, tag) Writes C bytes of the tag value to the buffer indicated by C. This call can only be made when encrypting data and B all data has been processed (e.g. after an EVP_EncryptFinal() call). C specified here must be 16 (B, i.e. 128-bits) or less. =item EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, taglen, tag) Sets the expected tag to C bytes from C. The tag length can only be set before specifying an IV. C must be between 1 and 16 (B) inclusive. This call is only valid when decrypting data. =back =head1 NOTES Where possible the B interface to symmetric ciphers should be used in preference to the low-level interfaces. This is because the code then becomes transparent to the cipher used and much more flexible. Additionally, the B interface will ensure the use of platform specific cryptographic acceleration such as AES-NI (the low-level interfaces do not provide the guarantee). PKCS padding works by adding B padding bytes of value B to make the total length of the encrypted data a multiple of the block size. Padding is always added so if the data is already a multiple of the block size B will equal the block size. For example if the block size is 8 and 11 bytes are to be encrypted then 5 padding bytes of value 5 will be added. When decrypting the final block is checked to see if it has the correct form. Although the decryption operation can produce an error if padding is enabled, it is not a strong test that the input data or key is correct. A random block has better than 1 in 256 chance of being of the correct format and problems with the input data earlier on will not produce a final decrypt error. If padding is disabled then the decryption operation will always succeed if the total amount of data decrypted is a multiple of the block size. The functions EVP_EncryptInit(), EVP_EncryptInit_ex(), EVP_EncryptFinal(), EVP_DecryptInit(), EVP_DecryptInit_ex(), EVP_CipherInit(), EVP_CipherInit_ex() and EVP_CipherFinal() are obsolete but are retained for compatibility with existing code. New code should use EVP_EncryptInit_ex2(), EVP_EncryptFinal_ex(), EVP_DecryptInit_ex2(), EVP_DecryptFinal_ex(), EVP_CipherInit_ex2() and EVP_CipherFinal_ex() because they can reuse an existing context without allocating and freeing it up on each call. There are some differences between functions EVP_CipherInit() and EVP_CipherInit_ex(), significant in some circumstances. EVP_CipherInit() fills the passed context object with zeros. As a consequence, EVP_CipherInit() does not allow step-by-step initialization of the ctx when the I and I are passed in separate calls. It also means that the flags set for the CTX are removed, and it is especially important for the B flag treated specially in EVP_CipherInit_ex(). Ignoring failure returns of the B initialization functions can lead to subsequent undefined behavior when calling the functions that update or finalize the context. The only valid calls on the B when initialization fails are calls that attempt another initialization of the context or release the context. EVP_get_cipherbynid(), and EVP_get_cipherbyobj() are implemented as macros. =head1 BUGS B and B only refer to the internal ciphers with default key lengths. If custom ciphers exceed these values the results are unpredictable. This is because it has become standard practice to define a generic key as a fixed unsigned char array containing B bytes. The ASN1 code is incomplete (and sometimes inaccurate) it has only been tested for certain common S/MIME ciphers (RC2, DES, triple DES) in CBC mode. =head1 EXAMPLES Encrypt a string using IDEA: int do_crypt(char *outfile) { unsigned char outbuf[1024]; int outlen, tmplen; /* * Bogus key and IV: we'd normally set these from * another source. */ unsigned char key[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}; unsigned char iv[] = {1,2,3,4,5,6,7,8}; char intext[] = "Some Crypto Text"; EVP_CIPHER_CTX *ctx; FILE *out; ctx = EVP_CIPHER_CTX_new(); if (!EVP_EncryptInit_ex2(ctx, EVP_idea_cbc(), key, iv, NULL)) { /* Error */ EVP_CIPHER_CTX_free(ctx); return 0; } if (!EVP_EncryptUpdate(ctx, outbuf, &outlen, intext, strlen(intext))) { /* Error */ EVP_CIPHER_CTX_free(ctx); return 0; } /* * Buffer passed to EVP_EncryptFinal() must be after data just * encrypted to avoid overwriting it. */ if (!EVP_EncryptFinal_ex(ctx, outbuf + outlen, &tmplen)) { /* Error */ EVP_CIPHER_CTX_free(ctx); return 0; } outlen += tmplen; EVP_CIPHER_CTX_free(ctx); /* * Need binary mode for fopen because encrypted data is * binary data. Also cannot use strlen() on it because * it won't be NUL terminated and may contain embedded * NULs. */ out = fopen(outfile, "wb"); if (out == NULL) { /* Error */ return 0; } fwrite(outbuf, 1, outlen, out); fclose(out); return 1; } The ciphertext from the above example can be decrypted using the B utility with the command line (shown on two lines for clarity): openssl idea -d \ -K 000102030405060708090A0B0C0D0E0F -iv 0102030405060708 = 16. */ int ret = 0, encrypt = 1, outlen, len; EVP_CIPHER_CTX *ctx = NULL; EVP_CIPHER *cipher = NULL; OSSL_PARAM params[2]; ctx = EVP_CIPHER_CTX_new(); cipher = EVP_CIPHER_fetch(NULL, "AES-256-CBC-CTS", NULL); if (ctx == NULL || cipher == NULL) goto err; /* * The default is "CS1" so this is not really needed, * but would be needed to set either "CS2" or "CS3". */ params[0] = OSSL_PARAM_construct_utf8_string(OSSL_CIPHER_PARAM_CTS_MODE, "CS1", 0); params[1] = OSSL_PARAM_construct_end(); if (!EVP_CipherInit_ex2(ctx, cipher, key, iv, encrypt, params)) goto err; /* NOTE: CTS mode does not support multiple calls to EVP_CipherUpdate() */ if (!EVP_CipherUpdate(ctx, out, &outlen, msg, msg_len)) goto err; if (!EVP_CipherFinal_ex(ctx, out + outlen, &len)) goto err; ret = 1; err: EVP_CIPHER_free(cipher); EVP_CIPHER_CTX_free(ctx); return ret; } =head1 SEE ALSO L, L, L, L, L Supported ciphers are listed in: L, L, L, L, L, L, L, L, L, L, L, L, L, L, =head1 HISTORY Support for OCB mode was added in OpenSSL 1.1.0. B was made opaque in OpenSSL 1.1.0. As a result, EVP_CIPHER_CTX_reset() appeared and EVP_CIPHER_CTX_cleanup() disappeared. EVP_CIPHER_CTX_init() remains as an alias for EVP_CIPHER_CTX_reset(). The EVP_CIPHER_CTX_cipher() function was deprecated in OpenSSL 3.0; use EVP_CIPHER_CTX_get0_cipher() instead. The EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2(), EVP_CipherInit_ex2(), EVP_CIPHER_fetch(), EVP_CIPHER_free(), EVP_CIPHER_up_ref(), EVP_CIPHER_CTX_get0_cipher(), EVP_CIPHER_CTX_get1_cipher(), EVP_CIPHER_get_params(), EVP_CIPHER_CTX_set_params(), EVP_CIPHER_CTX_get_params(), EVP_CIPHER_gettable_params(), EVP_CIPHER_settable_ctx_params(), EVP_CIPHER_gettable_ctx_params(), EVP_CIPHER_CTX_settable_params() and EVP_CIPHER_CTX_gettable_params() functions were added in 3.0. The EVP_CIPHER_nid(), EVP_CIPHER_name(), EVP_CIPHER_block_size(), EVP_CIPHER_key_length(), EVP_CIPHER_iv_length(), EVP_CIPHER_flags(), EVP_CIPHER_mode(), EVP_CIPHER_type(), EVP_CIPHER_CTX_nid(), EVP_CIPHER_CTX_block_size(), EVP_CIPHER_CTX_key_length(), EVP_CIPHER_CTX_iv_length(), EVP_CIPHER_CTX_tag_length(), EVP_CIPHER_CTX_num(), EVP_CIPHER_CTX_type(), and EVP_CIPHER_CTX_mode() functions were renamed to include C or C in their names in OpenSSL 3.0, respectively. The old names are kept as non-deprecated alias macros. The EVP_CIPHER_CTX_encrypting() function was renamed to EVP_CIPHER_CTX_is_encrypting() in OpenSSL 3.0. The old name is kept as non-deprecated alias macro. The EVP_CIPHER_CTX_flags() macro was deprecated in OpenSSL 1.1.0. =head1 COPYRIGHT Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at L. =cut