text/microsoft-resx 2.0 System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Map with ID {0} does not point to a valid map An error message that is displayed if there is a MapID that does not reference a valid map Fusion application does not specify a map An error message that is displayed if the map is missing Error validating MapDefinition {0}, message: {1} An error message that is displayed if an error occurs while validating a map Fusion application specifies a start view that is outside the map's initial extents An error message that is displayed if the start view is outside the defined map Could not create load procedure of type: Copied resource: {0} No coordinate system specified. The coordinate system if not specified will default to LL84 No source DWF file specified Bad Document: Expected attributes at the root level node Resource cannot be downgraded. It is already older than the version this converter can downgrade to Resource cannot be upgraded. It is already newer than what this converter can upgrade to A resource converter for {0} is already registered This feature source does not connect an externally aliased file This feature source does not connect to an embedded data file There is no downgrade path to the desired resource version There is no registered validator for {0} v{1}. Validation cannot be performed A warning message that is displayed if there is no registered validator for the specified resource and version Could not find matching serializer for this resource: There is no upgrade path to the desired resource version No connection attached to this resource A resource serializer has already been registered for {0} v{1} Factory method already registered for version: Connection test failed: {0} An error message that is displayed if a connection test on the feature source failed Spatial context extent appears to be invalid (or is the default extent returned by FDO provider. Meaning it very likely does not truly represent the extent of your data) A warning message that is displayed if the spatial context has the default extent Empty spatial context extent detected A warning message that is displayed when the spatial context is empty Could not obtain identity properties for {0}. This class either has no identity properties and/or is derived from a view with no uniquely identifiable columns. Attempting to create feature joins from this class may produce unexpected results. A warning message that is displayed when we can't obtain identity properties from a class because it is a view No spatial contexts found. If this feature source is strictly used for Feature Joins, this warning can be safely ignored A warning message that is displayed when the featuresource fails to report its spatial context No primary key defined for class: {0}, features will not be selectable and feature joins on this class may produce unexpected results An information message that is displayed if the schema has no primary key defined Failed to read identity properties: {0} An error message that is displayed if the primary key information could not be read Failed to read schema description: {0} An error message that is displayed if the schema information could not be read No schemas found in datasource A warning message that is displayed if the featuresource has no schemas Failed to read spatial context: {0} An error message that is displayed if the spatial context could not be read Failed to load specified Drawing Source Failed to load specified Feature Source An error message that is displayed if the featuresource fails to load Failed to find geometry column {0} in schema {1} on featuresource {2} An error message that is displayed if the geometry is not present in the selected schema Layer is missing core information An error message that is displayed if the layer has a null reference The minimum scale ({0}) is larger than the maximum scale ({1}) An error message that is displayed if the scale ranges are reversed No FeatureSource is assigned to the layer An error message that is displayed if the layer has no FeatureSource No Geometry is assigned to the layer An error message that is displayed if the layer has no geometry column selected No scale ranges are defined, no data can be displayed An error message that is displayed if there are no scale ranges defined More than one scale ranges is defined, this is valid, but unsupported by Maestro A warning message that is displayed if a raster layer has multiple scale ranges defined The scale range {0}-{1} overlaps the range {2}-{3} A warning message that is displayed if two scaleranges overlap Failed to validate column and schema An error message that is displayed if the schema and column read fails Failed to find schema {0} in featuresource {1} An error message that is displayed if the selected schema is not present in the FeatureSource Referenced sheet layer {0} not found in sheet {1} of referenced Drawing Source Referenced sheet {0} not found in referenced Drawing Source The layer has no type, or the type is unsupported by Maestro A warning message that is displayed if the layer type is unknown Factory method already registered for load procedure type: Convert to SDF option is not supported by Maestro A warning message about the lack of SDF conversion support DWF Load Procedures cannot be executed by Maestro A warning message indicating the lack of DWF support in Maestro DWG Load Procedures cannot be executed by Maestro A warning message indicating the lack of DWG support in Maestro Generalization of source data is not supported by Maestro A warning message about the lack of Generalization support Raster Load Procedures cannot be executed by Maestro A warning message about the lack of Raster support SDF 2 Migration options are not supported by Maestro. Ensure your source files are SDF3 files. A warning message about the lack of SDF2 support Source file not found: {0} An error message indicating that a source file in the load procedure does not exist Data from {0} is not visible in the map's start extent A warning message that is displayed if a layer reports an extent that is outside the map's extent {0} has a different coordinate system than the map, this will impact performance as the coordinates are transformed while rendering the map. Maestro cannot validate the extent of the data. A warning message that is displayed if a layer reports a coordinate system that differs from the map's. Layer {0}'s FeatureSource could not be read: {1} An error message that is displayed if a FeatureSource fails to load Group {0} has the default legend label An information message that is displayed if a group is assigned the default group label Group {0} does not have a legend label An information message that is displayed if a group has a blank legend label Layer {0} does not have a legend label An information message that is displayed if a layer has a blank legend label The layer name {0} is used for both "{1}" and "{2}" A warning message that is displayed if two layers share the same layer name Layer {0} could not be read: {1} An error message that is displayed if a LayerDefinition fails to load Layer {0} has no geometry column An error message that is displayed if a layer has no geometry column specified Layer {0} has an invalid Schema An error message that is displayed if the layer has no schema specified {0} has no spatial context (eg. no coordinate system) A warning message that is displayed if the FeatureSource reports no spatial context {0} has more than one spatial context, the following test results may be inacurate An information message that is displayed if a FeatureSource reports multiple spatial contexts {0} is a raster layer, and in another coordinate system than the map. No data will be displayed by the layer An error message that is displayed if a raster layer reports a different projection than the map, and the MapGuide server version does not support raster reprojection {0} could not be processed for spatial info: {1} An error message that is displayed if a resource fails to load Layer {0} is a type that is unsupported by Maestro A warning message that is displayed if a layer has a type that is not supported by Maestro Moved resource: {0} Moving resource ... Not a folder resource id: {0} Precondition failure: String is empty: Value is null: This connection does not support required service: Could not find template url for template: Unknown layer version: Unknown Web Layout version: Unsupported Load Procedure Type There web layout has more than one command named: {0} The search command {0} references more than one property named {1} Error validating MapDefinition {0}, message: {1} An error message that is displayed if the map validation fails Layout does not specify a map An error message that is displayed if no map is specified in the layout Context Menu contains a reference to a command that doesn't exist: {0} Task Pane contains a reference to a command that does not exist: {0} Toolbar contains a reference to a command that does not exist: {0} Layout specifies a start view that is outside the map's initial extents A warning message that is displayed if the layout specifies a start center point that is outside the map's specified extents Select More View Zoom Create buffers around the selected features Buffer Measure distances and areas on the map Measure Go to next view Next Go to previous view Previous Zoom in by a preset increment Zoom In Zoom out by a preset increment Zoom Out ..\Resources\BaseTemplate.ApplicationDefinition.xml;System.String, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089;iso-8859-1 Unknown Symbol Definition version: The Map Definition contains tiled layers but has no finite display scales defined The Map Definition {0} has a coordinate system that is not EPSG:3857. This map is in a group containing one or more commerical base layers. The specified Map Definition may not correctly display or line up with the commerical base layers. Line {0}, Char {1}: {2} Service Type not supported: {0} (null) Layer Group ({0}) belongs to a non-existent Layer Group ({1}) Layer ({0}) belongs to a non-existent Layer Group ({1}) XML content does not match any known resource Unknown Map Definition version: Unknown Watermark Definition version: The simple symbol definition contains an image graphic that references a resource id {0} with a non-existent resource data {1} The simple symbol definition contains an image graphic that references a non-existent resource id The Simple Symbol Definition has no geometry usage contexts specified. The simple symbol definition contains a symbol parameter {0} that is not referenced anywhere within the definition Map Definition has no coordinate system Copied: {0} => {1} Resource {0} downgraded to version {1} An item with the key value ({0}) already exists in the collection The scale range {0} to {1} contains a composite style defined alongside a area/point/line style. The composite style takes precedence in such cases meaning the area/point/line style is always ignored Infinity ..\Resources\BaseTemplate.ApplicationDefinition1.xml;System.String, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089;Windows-1252 Due to a limitation in the public APIs provided by MapGuide. This Feature Source cannot be packaged by Maestro's packager without discarding the MG_USER_CREDENTIALS element. The workaround is to either re-secure these Feature Sources after loading the Maestro-created package, or to use the official packaging method which will preserve MG_USER_CREDENTIALS in its encrypted state This Feature Source uses plaintext credentials. This would happen if you are using an old version of Maestro (4.0.2 or older). This is not secure as such Feature Sources can be accessed by the Anonymous MapGuide user account. It is strongly advised that such Feature Sources can be re-secured with MapGuide/Infrastructure Studio or with Maestro 4.0.3 (or newer) Feature source content has the %MG_USERNAME% and %MG_PASSWORD% tokens, but does not have the MG_USER_CREDENTIALS resource data item